User's Manual

Name (12-2-X-1): This is the name associated with each one of the three

available profiles that appears at the higher menu level when the phone offers

the selection of the profile whose parameters are to be displayed/changed.

Homepage (12-2-X-2): enter the URL address of the opening page (if other

than the Proxy WAP it might not be accepted). It usually starts with “http://

wap…”

Proxy (12-2-X-3): This menu item opens up two submenus where you can

define the Proxy to connect to:

IP address (12-2-X-3-1): Enter the IP address (of the Proxy) using & to

shift the cursor between the digits of the parameter (when a field is full the

cursor automatically moves onto the next field).

IP port (12-2-X-3-2): Enter the required figure (usually 9201 or 9203).

Access (12-2-X-4): This menu takes you to the following 5 submenus:

Conn. number (12-2-X-4-1): is the number to connect to for the WAP

connection (as with a normal modem connection).

Call type (12-2-X-4-2): the call to make the connection may be ISDN or

Analogue.

Password (12-2-X-4-4): enter the password if required.

Linger-Time (12-2-X-4-5): the connection time in seconds after which if there

is no data exchange the call is ended.

Set default (12-2-X-5): to set the current Profile as the default.

Note: “X” indicates the current Profile (1, 2 or 3).

After entering all the data, repeatedly press  to quit this menu and

access menu 12-1 “Home” to start the connection.