User's Manual

60
8-3 Circuit wait
This makes it possible to define the length of the maximum wait
before disconnecting from a data circuit. The value set by the user is
stored in the phone, but some providers define a minimum limit that
has priority over this value. The maximum value is 9999 seconds.
8-4 Key pressure timeout
In general, every key can be used to obtain different characters,
pressing it several times in succession. Timeout is the length of time
after which the last character displayed becomes final and the cursor
passes on to the next position.
This function makes it possible to change the speed with which the
cursor passes on to the next position, choosing it from Fast, Medium
Slow (respectively 1 – 1.5 – 2 seconds).
8-5 Protection
This opens the following 6 submenus:
8-5-1 Connection prompt
To enable or disable the “Protected connection stability”
warning.
8-5-2 Protection prompt
To enable or disable the message, “You are about to enter
an unprotected area. OK?” that appears before you leave a
protected area.
8-5-3 Current certificate
The phone utilizes digital certificates (called “CA”) issued by
trusted third parties to authenticate some web sites.
On accessing this function, the phone shows the available
information for the certificate being used for the current
session.
8-5-4 CA certificates
This function displays the list of CA certificates stored in the
phone, to display the main data and enable or disable them.