User's Manual

QUICK HELP

How to make your first call

Carefully read the instructions and information supplied by the network

operator or service provider with the SIM card.

1 Insert a valid SIM card into the phone when it is switched off.

2 Insert the battery.

3 If necessary, charge the battery with the specific battery charger.

Note: The phone can be used while recharging, but this lengthens the

recharge time.

4 Switch on the phone by holding down . If the display shows

PINX

key in the PIN provided together with the SIM card and press .

When the PIN is requested, press H to display the available lan-

guages; press L to send an emergency call

(not available in all

countries-contact the network operators for information).

(You should not misuse this service).

5 When the name of the network operator or service provider who supplied

the SIM card appears, the display is on stand-by and the phone is con-

nected to the network.

6 Key in the dialling code, then the phone number and press .

How to answer a call

1 With the phone on and in an area covered by the GSM network, an incom-

ing call is signalled by the ringer and the display shows:

<<CALL>>

Note: to switch off the ringer without rejecting the incoming call, press

G.

2 Press  to answer and then



to end a call.

How to save a number to the phonebook

1 With the display on stand-by, enter the phone number preceded by the

local area code and the international code (with + instead of 00).

Note: the + symbol is displayed by holding down .

2 Press  to reach the “Phonebook” menu and confirm with 



.

3 Enter the name and press 



.

Pressing the first time enters the first letter, the second time the next one and

so on. To delete the last letter keyed in, briefly press .