User's Manual
Table Of Contents
- 1 Introduction
- 2 Block Diagram
- 3 Application Interface
- 4 Module Pins
- 5 Electrical Characteristics
- 6 Mechanical Characteristics
- 7 Application Diagram
- 8 Approvals/Certifications
- 9 Related Documents
- 10 Packing
- 11 Ordering Information
- 12 History
BlueMod+S/AI
www.stollmann.de Page 40 of 52
8 Approvals/Certifications
The BlueMod+S/AI has been tested to comply to the appropriate EU, FCC and IC directives.
CE testing is intended for end products only. Therefore CE testing is not mandatory for a Bluetooth
Module sold to OEM’s. However Stollmann E+V GmbH provides CE tested Modules for customers
in order to ease CE compliance assessment of end products and to minimize test effort.
8.1 Declaration of Conformity CE
The BlueMod+S/AI fully complies with the essential requirements of the following EU directives:
• R&TTE 1999/5/EC
• RoHS 2011/65/EC
The actual version of EU Declaration of Conformity (EU DoC) can be downloaded from the
qualification section on the product page via the following link:
http://www.stollmann.de/en/support/downloads/bluetooth-adapter/bluemod-s.html
The above link may expire, because a new version of the EU DoC is available. Please look up the
EU DoC from the Stollmann web site directly then.
8.2 FCC Compliance
The BlueMod+S/AI has been tested to fulfill the FCC requirements. Test reports are available on
request. Grants of the Full Modular Approval will be shown below.