User's Manual
Table Of Contents
- 1 Introduction
- 2 Block Diagram
- 3 Application Interface
- 4 Module Pins
- 5 Electrical Characteristics
- 6 Mechanical Characteristics
- 7 Application Diagram
- 8 Approvals/Certifications
- 9 Related Documents
- 10 Packing
- 11 Ordering Information
- 12 History
BlueMod+S/AI
Hardware Reference
www.stollmann.de Page 8 of 52
1 Introduction
This Hardware Reference documents how the BlueMod+S/AI can be integrated into customer
systems. It addresses hardware specifications of the BlueMod+S/AI and requirements of the
hardware environments for the BlueMod+S/AI.
Notation: The term BlueMod+S refers to the BlueMod+S/AI and is used as an abbreviation.
For detailed information about software interfaces refer to [5].
For the latest version of this document please check the following URL:
http://www.stollmann.de/en/support/downloads/bluetooth-adapter/bluemod-s.html
1.1 Feature Summary
• Bluetooth specification V4.0 compliant
• Supports Bluetooth low energy
• Fully qualified Bluetooth V4.0 Single Mode LE
• CE certified
• FCC and IC certified
• Nordic nRF51822 inside
• Fast Connection Setup
• RF output power -30 up to +3dBm
• RSSI
• High sensitivity design
• Supply voltage range 1,8V to 3,6V
• Internal crystal oscillator (16 MHz)
• LGA Surface Mount type. BlueMod+S: 17 x 10 x 2.6 mm
3
• Pin compatible to Stollmann BlueMod+SR dual mode module
• Shielded to be compliant to FCC full modular approval
• Flexible Power Management
• 128-bit AES encryption
• High-speed UART interface
• I
2
C Master
• SPI Master/Slave interface
• Low power comparator
• Real Time Counter
• Up to 19 digital IO’s for individual usage by embedded software
• Up to 6 anlog inputs for individual usage by embedded software
• 8/9/10bit ADC
• Arm® Cortex
TM
-M0 core for embedded profiles or application software
• Manufactured in conformance with RoHS2
• Operating temperature -25 ... +75 °C
• Weight: tbd. g