FN980m TLB HW Design Guide [01.2017] 1VV0301651 Rev. 0 – 2020-02-28 Mod.0818 2017-01 Rev.
HW Design Guide Template SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE NOTICE While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be reliable. However, no responsibility is assumed for inaccuracies or omissions.
HW Design Guide Template USAGE AND DISCLOSURE RESTRICTIONS I. License Agreements The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. II. Copyrighted Materials Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law.
HW Design Guide Template APPLICABILITY TABLE PRODUCTS FN980m 1VV0301651 Rev.
HW Design Guide Template Contents NOTICE…....................................................................................................... 2 COPYRIGHTS ................................................................................................ 2 COMPUTER SOFTWARE COPYRIGHTS ...................................................... 2 USAGE AND DISCLOSURE RESTRICTIONS ............................................... 3 APPLICABILITY TABLE ...............................................................
HW Design Guide Template 1. INTRODUCTION Scope This scope of this document is to describe the FN980m TLB which is part of complete FN980m Development Kit (Dev-Kit) Audience This document is intended for Telit customers, especially system integrators, about to implement their applications using the Telit module. Contact Information, Support For general contact, technical support services, technical questions and report documentation errors contact Telit Technical Support at: • • • • TS-EMEA@telit.
HW Design Guide Template Text Conventions Danger – This information MUST be followed or catastrophic equipment failure or bodily injury may occur. Caution or Warning – Alerts the user to important points about integrating the module, if these points are not followed, the module and end user equipment may fail or malfunction. Tip or Information – Provides advice and suggestions that may be useful when integrating the module. All dates are in ISO 8601 format, i.e. YYYY-MM-DD. 1VV0301651 Rev.
HW Design Guide Template Related Documents • • • FN980m HW User Guide, 1VV0301603 FN980m Pinout, 80624ST10993A Telit EVB (Evaluation Board) User Guide, 1VV0301249 1VV0301651 Rev.
HW Design Guide Template 2. GENERAL PRODUCT DESCRIPTION Overview The Translation Board (TLB) is custom designed to interface the Telit module variant FN980m with the Telit Generic Evaluation Board (EVB) thus forming the complete Development Kit of FN980m. The TLB provides the mapping of Telit module signals and functions into the generic EVB signals and functions.
HW Design Guide Template TLB View The below pictures show the TLB top and bottom view. FN980m TLB Top View FN980m TLB Bottom View 1VV0301651 Rev.
HW Design Guide Template FN980m TLB Information – There is the TIM on the TLB to transfer the heat generated by FN980m. There are the large solder resist opening area on the bottom of FN980m for the better heat dissipation. Adding a thermal TIM on the back of FN980m is the most important thing in thermal dissipation point of view. With this action, the temerature of FN980m can be decreased significantly. 1VV0301651 Rev.
HW Design Guide Template Antenna Ports Information – For more detail information of Antenna ports, please refer to FN980m HW User Guide, 1VV0301603, Chapter 7.1 Antenna Interface. 1VV0301651 Rev.
HW Design Guide Template Guidance for Evaluation Board Information – For more detail information of power supply source selection, please refer to 1VV0301249 Telit Evaluation Board (EVB) HW User Guide, Chapter 7.1 Supply Source Selection. 1VV0301651 Rev.
HW Design Guide Template 1VV0301651 Rev.
HW Design Guide Template Warning – FN980m features high throughput and high speed peripherals. For such a reason, users who want to use USB interface MUST use USB C type connector which is in TLB. The USB connector which is in TELIT EVB is not supported on FN980m. SIM Card You can use the SIM 1 Socket on the top interface board. Power ON To Power-ON the Telit module, connect an AC adaptor. Power OFF To Power-OFF the Telit module, unplug an adaptor.
HW Design Guide Template RF Antenna For RF antenna, connect antennas to the 4 antenna ports ANT0, ANT1, ANT2 and ANT3. GNSS Antenna For GNSS antenna, you can use ANT4. *USB Type-C FN980m supports USB 3.1 GEN2 interface. USB connector of Telit Evaluation Board does not support 10 Gbit/s. Must use USB Type-C connector which is located in TLB of FN980m. AT Commands / DATA Port 1VV0301651 Rev. 0 Connect the USB Type-C cable to a Windows PC or Linux PC only after you install necessary drivers.
HW Design Guide Template 3. COMPONENT ASSEMBLY DIAGRAM Layout Component Diagram Top View 1VV0301651 Rev.
HW Design Guide Template Component Diagram Bottom View 1VV0301651 Rev.
HW Design Guide Template 4. SCHEMATICS 1VV0301651 Rev.
HW Design Guide Template 1VV0301651 Rev.
HW Design Guide Template Information – For a higher resolution picture of schematic, please contact Telit technical support as below. 1VV0301651 Rev. 0 TS-EMEA@telit.com TS-AMERICAS@telit.com TS-APAC@telit.com TS-SRD@telit.
HW Design Guide Template 5. SAFETY RECOMMENDATIONS READ CAREFULLY Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and has to be avoided in the following areas: • • Where it can interfere with other electronic devices in environments such as hospitals, airports, aircrafts, etc. Where there is risk of explosion such as gasoline stations, oil refineries, etc.
HW Design Guide Template 6. ACRONYMS EVB TLB IFBD USB SIM TIM 1VV0301651 Rev.
HW Design Guide Template 7. DOCUMENT HISTORY Revision Date Changes 0 2020-02-28 First draft 1VV0301651 Rev.
[01.2017] Mod.0818 2017-01 Rev.
