FN980m TLB HW Design Guide r0

HW Design Guide Template
1VV0301651 Rev. 0 Page 15 of 25 2020-02-28
Warning –
FN980m features high throughput and high speed
peripherals.
For such a reason, users who want to use USB interface MUST use
USB C type connector which is in TLB.
The USB connector which is in TELIT EVB is not supported on
FN980m.
SIM Card You can use the SIM 1 Socket on the top interface board.
Power ON To Power-ON the Telit module, connect an AC adaptor.
Power OFF To Power-OFF the Telit module, unplug an adaptor.
Modem Reset To reset the Telit module, press the reset button for more than
1 second.