Specs & Datasheet
Product Description
The LE922A6 product series deliver high speed data rates
for deployment in the fastest LTE cellular 4G networks up
to 300 Mpbs downlink and 50Mbps in uplink.
These modules are therefore particularly well-suited, but
not limited, to those devices that have extremely high data
throughput requirements, such as mobile broadband gate-
ways and routers, taking the benefit of the most advanced
3GPP Release 10 LTE connectivity in one of the following
configurations:
• Back up connectivity when primary wire line internet
connections are not available, ensuring seamless
connectivity to the end users
• Hybrid connectivity combining DSL and LTE data stream
to enhance data rate
• Mobile hotspots with MiFi connectivity
The LE922A6 products are optimized for LTE Cat 6 high
throughput, supporting MIMO and LTE Advanced carrier
aggregation capabilities.
In addition, for voice applications, specific models support
integrated enhanced VoLTE based services and IMS solu-
tions with SRVCC over 3G for seamless voice continuity
during mobility.
Key Benets
• Take advantage of the latest generation of LTE-A
networks delivering LTE Cat 6 throughput up to 300
Mbps in DL and 50 Mbps in UL
• Increased connectivity performance with carrier
aggregation up to 40MHz bandwidth, both intraband and
interband, and MIMO 2x2
• Multiple regional variants to support the various bands
(FDD/TDD) and band combinations deployed world-wide,
all with the same form factor
• LGA form factor well suites the industrial segments,
where requirements for improved robustness as well as
extended temperature range are more demanding,
without compromising the efficiency for retail solutions
• Cortex-A7 application processor with high computing
capability already embedded in the SoC to reduce
dependencies from an external host processor for all
those end-products as portable MiFi routes, that do not
require additional Ethernet or analogic interfaces
Variants
Two different models are available to fulfill the require-
ments of the Australian and European market and addi-
tional regional variants will follow.
Multi-band configurations, covering different sets of 4G
bands and 3G bands where fall back to 3G technologies is
required.
All product variants add the value of specific MNO certi-
fications as well as regulatory certifications and GCF or
PTCRB.
Connecting the world
from the inside out
1
AVAILABLE FOR
EMEA
Australia
IoT Modules IoT PlatformsIoT Connectivity
Complete,
Ready to Use Access
to the Internet of Things
LTE 300/50 | HSPA+ 42.0/11.5
Embedded
LE922A6 Series
34 mm
3 mm
40 mm