Installation Instructions

SkyBitz SkyHub & SkyCamera Installation 3
• Fasten the Short Shroud to the SkyHub with two, 10-32 tamper proof screws
SkyCamera Installation Components and Tools
• SkyCamera with SkyCamera Mounting Bracket
• 4, 10-32 Tamper Proof Screws and 5/32 Inch Pin in Hex Tamper Proof Screwdriver
• 8, 3/16 inch stainless steel rivets
• SkyCamera circular alignment tool
• 1.75 inch hole saw
• Heavy duty rivet tool
• 50/50 Isopropyl Alcohol/Water Solution & Clean Rags
• Scotch-Brite pad
• 3m Primer 94 Ampoule
SkyCamera Mounting Location
The SkyCamera will be mounted to the roadside wall of the trailer about an inch down from the
bottom of the top rail and about an inch forward of the panel seam as shown. Open the roadside
door all the way to check for interference from the lock bar location. If the lock bars will hit the
SkyCam, move the SkyCamera location forward until it clears the lock bars.