User's Manual
Table Of Contents
EcoTouch Configuration Changes
EcoTouch Configuration Changes
Change Channel
1. On the EcoTouch, “three-finger tap” anywhere on the screen.
2. The System Status screen appears.
3. Press the Config button.
4. Enter the password C57A
5. Touch Enter.
6. Touch Reconnect
7. Touch Search
8. When “Success” message appears, press Exit, press Exit on the next screen and Exit on the third
screen.
Unpair EcoTouch
1. On the EcoTouch, “three-finger tap” anywhere on the screen.
2. The System Status screen appears.
3. Touch the Config button.
4. Enter the password C57A
5. Touch Enter.
6. Touch Unpair.
7. Touch Delete.
8. Are you sure you want to delete pairing with EcoSource? Touch Delete
9. When the “No longer Paired” message appears, touch Exit, touch Exit on the next screen and Exit on
the third screen.
Activate “Display Mode” Option
1. On the EcoTouch, “three-finger tap” anywhere on the screen.
2. The System Status screen appears.
3. Press the Config button.
4. Enter the password C57A
5. Touch Enter
6. Touch Display/Config
7. Enable Demo Mode field: touch the pencil icon to select “Y” or “N”
8. Display Style field: touch the pencil icon to select “Detailed” or “Minimal”
9. Touch Exit
FYI, touch the hamburger icon to toggle between Detailed and Minimal display modes.
System Status Screen
(Displays Firmware Version, MAC, EPID, Channel, Address, LQI and Paired status.)
1. On the EcoTouch, “three-finger tap” anywhere on the screen.
2. The System Status screen appears.
3. Touch Exit when done.
EcoWave Featuring EcoTouch IO&M Guide Telkonet, Inc.
For Use with Firmware Version 2.x 20800 Swenson Drive, Suite 175
Waukesha, WI 53186
Revision 2 (800) 380-9640
Page 32 www.telkonet.com