User's Manual

EcoSource Installation
High/Low Voltage Options
High Voltage Installation Option (page 6)
• High Voltage is defined as 48 volt or
greater.
• There are two installation options:
1) JBOX with Vertical Mud Ring Mount:
requires adapter plate as shown in
Figure 2.
2) Factory HVAC Mount
Low Voltage Installation Options (page 14)
• There are 3 options; select based on code
and desired look:
1) Drywall mount: no conduit required;
no JBOX adapter plate required.
2) JBOX with Vertical Mud Ring Mount:
requires adapter plate as shown in
Figure 2.
3) JBOX with Horizontal Mud Ring
Mount: requires wing nut, hole must
be drilled in backplate; no JBOX
plate required.
High Voltage Installation
(For Low Voltage Installation instructions, see page 14).
Mounting Preparation
The back plate type must be defined as low or high voltage prior to shipment.
EcoWave Featuring EcoTouch IO&M Guide Telkonet, Inc.
For Use with Firmware Version 2.x 20800 Swenson Drive, Suite 175
EcoSour ce Waukesha, WI 53186
Revision 2 [phone]
Page 6 www.telkonet.com