User's Manual

Associating the EcoGuard with an EcoInsight
EcoGuard Installation Guide
Revision: 6
5
Associating the EcoGuard with an EcoInsight
1. Verify both the EcoGuard and the EcoInsight are powered.
2. Press and hold the “Fan” button on the EcoInsight for 10 seconds, then press the “On/Off” button. The
Maintenance Menu should appear.
3. Verify the text “Learn” appears in the Maintenance Menu.
4. Press the “On/Off” button to enter the Learn menu. Either one or two numbers will appear in the
center of the screen, depending on the number of devices associated with the EcoInsight. See Figure 2
and Figure 3.
Figure 2: Maintenance -> Learn Menu with 0 Devices Associated
Figure 3: Maintenance -> Learn Menu with 1 Device Associated