User Manual

1. Installation

Installation

Veden vuotoanturin käyttöopas

Asennus

Bedienungsanleitung für Wasserlecksensor

You can also read the manual online.

Just follow the link: telld.us/m15246

Installation

1.1

User manual for

Water leak sensor

Användarmanual för Vattenläckage sensor

Remove battery insulation

film to power on.

Twist

facebook.com/telldus

@telldus

2. Connect sensor to TellStick

Koppla sensor till TellStick

Liitää anturi TellStick:iin

Sensor mit TellStick verbinden

Control

Devices

Log into live.telldus.com

Add a new device

Requires a TellStick and a Telldus Live account

Select your device type:

Add new device wizard

Secure

Group

433,92 MHz receivers

Next >><< Back

2.3

2.1

2.5

2.6

2.2

Name: Water leak sensor

Enter name:

Connect sensor by pressing

3 times on the button.

Press next and then the installation is done.

PAGE 1
User manual for Water leak sensor facebook.com/telldus Användarmanual för Vattenläckage sensor Veden vuotoanturin käyttöopas @telldus Bedienungsanleitung für Wasserlecksensor You can also read the manual online. Just follow the link: telld.us/m15246 1. Installation Asennus Installation Installation 1.1 Remove battery insulation film to power on. Twist 2. Connect sensor to TellStick Liitää anturi TellStick:iin Koppla sensor till TellStick 2.1 Requires a TellStick and a Telldus Live account 2.
PAGE 2
3. Placing the sensor Sijoita anturi Placera sensorn 3.1 Anbringen des sensors 3.3 Screw on the wall Glue on the wall Hang onto a nail Pick one of the options above to mount the sensor. (Note! Don’t mount directly on or near metaI, since metaI objects may weaken the radio signal strength.) Place probe with its metal parts touching the area where you want to detect a potential water leak. 3.2 Put back the frontpiece. (Note the direction.