User Manual

2. Connect sensor to app

1. Installation

Koppla sensor till appen

Installation

Mini PIR-Sensor -käyttöopas

Liitä anturi sovellukseen

Asennus

Bedienungsanleitung für Mini PIR-Sensor

You can also read the manual online.

Just follow the link: telld.us/m15256

Sensor mit App verbinden

Installation

1.1

2.1

2.2

User manual for

Mini PIR-sensor

Användarmanual för Mini PIR-sensor

Remove the small plastic tab from the

battery in the Mini PIR-sensor.

(When changing the battery - turn the lower

part of the PIR-sensor clockwise.)

facebook.com/telldus

@telldus

Follow the

instructions

in the app to

nish setup.

Download app

Open app, and

add a new device

Recommended height for

installation is 2.0-2.2 meters

to cover maximal detection

area. Detecting range of

sensor is 5 meterX110°.

3. Placing the sensor

Placera sensorn

Sijoita anturi Anbringen des sensors

PAGE 1
User manual for Mini PIR-sensor Användarmanual för Mini PIR-sensor facebook.com/telldus Mini PIR-Sensor -käyttöopas @telldus Bedienungsanleitung für Mini PIR-Sensor You can also read the manual online. Just follow the link: telld.us/m15256 1. Installation 1.1 Installation Remove the small plastic tab from the battery in the Mini PIR-sensor. Asennus Installation (When changing the battery - turn the lower part of the PIR-sensor clockwise.) 2.
PAGE 2
Read this before installation Lue tämä ennen asennusta • • • • • • • This detector may not be installed outdoors. Avoid installing the detector near air-conditioners, heat sources, where pets move or exposed to sunlight. Try to avoid installing at ventilation exits. For rough surfaces: Fix bracket into wall by using the included screws, then clip the detector onto bracket. For smooth surfaces: You may use double adhesive tape for fastening the detector. Adjust detector according to actual condition.