Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k Mobile Communication Gateway Installation Manual MCG TQ377 TelliQ AB Glasbruksgatan 1, 732 31 Arboga, Sweden Tel: +46 589 12370, www.oem.telliq.
Titel Reg. Nr.
Titel Reg. Nr.
Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k Mounting the unit Mount the unit on a suitable location as an antenna with a clear view to the sky for communication and navigation. The unit shall be mounted flat horizontal. The unit shall not be mounted close to other antennas, if closer than 500mm than a radio evaluation needs to be done. Example on antenna pattern from above for cellular communication at 900MHz is given in the figure below.
Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k If the unit is to be connected to CAN-BUS, place the unit as close as possible to connection point. Mount the unit where the temperature is lower than 60℃. Drill one 5,5mm hole at the machine and screw the unit using one screw to the machine, use a force of 3Nm (max 3,6Nm).
Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k Electrical installation X1 X2 X3 X1 MCG Power Connector and cable The MCG Power Connector is an M12 standard male A-coded. The attached cable is a straight connector M12 standard female A-coded cable with free ends. Note! Some functions are critical for the unit to work properly and shall always be connected.
Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k X2 MCG CAN connector The MCG CAN Connector is an M12 standard female A-coded with interconnections according to the CANopen standard. The attached cable is a straight connector M12 standard male A-coded CAN cable with free ends. Note! All shields shall be connected on the machine side (GND). The MCG:CAN cable shall if connected as a stub (Drop Cable) not be longer than 1 meter.
Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k Commissioning The machine should be outside for optimal GNSS reception and where GSM/4G coverage is adequate. Turn on the ignition and engine for up to five minutes to active the unit for the first time. Then contact your account manager or technical contact for functional control and administration of the unit in the TelliQ Back Office. TelliQ Support is available 08.00-17.00 CET on telephone no.
Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k CADI functionality for commissioning and diagnostics of the MCG and its interfaces The Commissioning And Diagnostics Interface (“CADI”) can be accessed by any web browser, when attached to the access-point with the same SSID as the SN of the MCG unit. The key for the network is entered. Surf to: HTTPS://MCG.TELLIQ.COM Type the user name and the password.
Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k Connection settings are settings for the WiFi network Network test gives information on TBD Support If anything is missing from the delivery, or your appointed contact is unavailable please contact TelliQ Support on telephone no.: +46 589 123 70 or e-mail: support@telliq.com TelliQ AB Glasbruksgatan 1, 732 31 Arboga, Sweden Tel: +46 589 12370, www.oem.telliq.
Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k FCC Statement This unit has FCC ID: 2AS7RTQ377MCG This device contains radio transmitter with certification to ● FCC ID: XF6-M15SB ● FCC ID: RI7ME910C1WW ● IC: 8407A-M15SB ● IC: 5131A-ME910C1WW Part 15.19 NOTICE: This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).
Titel Reg. Nr. Date Author Revision Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k Part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
