Installation Manual

Titel Reg. Nr. Date Author Revision
Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k
Commissioning
The machine should be outside for optimal GNSS reception and where GSM/4G coverage is
adequate.
Turn on the ignition and engine for up to five minutes to active the unit for the first time. Then
contact your account manager or technical contact for functional control and administration of
the unit in the TelliQ Back Office.
TelliQ Support is available 08.00-17.00 CET on telephone no.: [phone] or email:
[e-mail]
LED functionality
The green status LED on the MCG can be used to monitor the basic MCG status. The status
LED have the following functionalities:
1. No LED lit = No power to the unit or the unit in power save mode.
2. Green LED lit = Got power to the unit (or waking up from power save) will be on for
some seconds
3. Green LED flashing (0,5Hz) = Normal operation
4. Green LED quick flashes (4Hz) = unit is not working as supposed
The standard functionality after starting a unit is that it is doing 1 to 3. For more information or if
quick flashes arise, please login using the smartphone.
TelliQ AB
Glasbruksgatan 1, 732 31 Arboga, Sweden
Tel: [phone], www.oem.telliq.com
Page:8