Installation Manual

Titel Reg. Nr. Date Author Revision
Installation Manual MCG TQ377 TQ-18-496 2019-05-29 Erik Ljung p1k
CADI functionality for commissioning and diagnostics of the MCG and
its interfaces
The Commissioning And Diagnostics Interface (“CADI”) can be accessed by any web browser,
when attached to the access-point with the same SSID as the SN of the MCG unit.
The key for the network is entered.
Surf to: HTTPS://MCG.TELLIQ.COM
Type the user name and the password.
Unit status gives information on the status of the MCG and it is possible to set the Kit type
(Machine type) from this view.
Register Values view gives information on the latest register values, internally in/from the MCG
or from the interfaces from the machine (example control system or CAN system data)
TelliQ AB
Glasbruksgatan 1, 732 31 Arboga, Sweden
Tel: [phone], www.oem.telliq.com
Page:9