User Manual

4. SPECIFICATIONS

General

Standards compliance IEEE 802.3 and 802.11b

Security WEP 64-bit, 128-bit, encryption RC4

Hardware

RF Frequency range: 2.4 ~ 2.4835GHz

Data rate 11Mbps / 5.5Mbps / 2Mbps / 1Mbps

DSSS (Direct Sequence Spread Spectrum) Modulation

DBPSK/DQPSK

1, 2Mbps: 11 chip/bit Barker Coding Coding

5.5, 11Mbps: Complementary Code Keying

Europe: 13 (3 non-overlapping)

US: 11 (3 non-overlapping)

France: 4 (1 non-overlapping)

Number of channels

Japan: 14 (3 non-overlapping)

RJ-45 Host interface

USB (local configuration)

Transmit power +15dBm (Typ.)

Receive sensitivity -83dBm (Typ.) for 11Mbps; -88dBm (Typ.) for 5.5/2/1Mbps; (@BER 10E-5)

Power ＜600mA @ 5Vdc

Range Open environment: up to 300m (985ft)

Office environment: up to 30m(98ft ) @ 11Mbps

up to 40m (131ft) @ 5.5Mbps

up to 60m (197ft) @ 2Mbps

up to 100m (328ft) @ 1Mbps

Range for the AP depends on many factors and can vary greatly depending on the

environment. The actual range may be less than stated.

Software

Local: APUtility under Windows 98/2000/ME/XP Management interface

Remote: SNMP under Windows 95/98/2000/ME/XP/NT

Mechanical

Antenna Two SX connectors for external antennas

Indicator LAN, Duplex, Power, WLAN

0 ~ 55°C (operation), -10 ~ +85°C (storage) Environmental

Relative Humidity 95% (non-condensing)

Dimensions 167.0 x 117.5 x 35.5mm (w/o antenna)

Weight Less than 350g (excluding power adapter)

Certificate

U.S., Canada: FCC Part 15, sections 15.247, 15.205, 15.209; RSS-210

Europe: ETS 300 328, ETS 300 826, CE Marked

EMC

Japan: ARIB STD T-66, D-33