User's Manual

2 Installation

The Wireless LAN Configuration Utility is installed simultaneously with the driver by executing the

Setup.exe file. The following illustration shows this program’s initial screen:

Installation procedures differ depending on whether this is an initial installation or an upgrade. The

following sections discuss these scenarios.

NOTE: Some versions of Microsoft Windows operating systems require administrator privileges

to install software. If this is the case for your operating system, be sure that you have such

privileges before executing the Setup.exe file.

2.1 Initial installation

For initial installation, the Setup.exe file should be run before the WLAN card is physically

installed in your computer. Only after you have run this command to install the utility and driver

should you install the Wireless LAN card in your computer.

The InstallShield window appears warning you to close any open programs on your computer.

Click on the Next button to continue. A screen then appears with the software license agreement

displayed. Click on the Yes button to accept the agreement and continue with the installation. Once

the installation is complete, click on the Finish button to return to your Windows desktop.

For PCMCIA or USB cards, simply insert or connect the card after running the Setup.exe file.

For PCI cards, you must shut down the computer, install the card in an available PCI slot, and

restart the computer.