User Manual

list. Next, press the button “I/O Port” and choose an 0x20 free I/O space. Add these values into the

dialog box. If at any point after the installation you want to change these values, go to the Control

Panel -> Network, select the Adapters tab, press the Properties button, and fill in the new values.

6) Next Windows will start copying the files. In case there is a version conflict. between one or more of

the files being copied and the files in your system, you should normally keep the latest version.

7) Finally, when the installation has been completed, you will need to restart your computer.

Note: If the card is not working properly, after a restart procedure, you should make sure that your

system has free resources ever it may shows them as being available.

2.3.3 Under MS Windows CE

Please follow the following steps to install the utility and driver.

1) Insert the supplied CD-ROM in the CD-ROM drive.

2) Click “Start” button, choose “Run” and type “D:\wince\setup.exe” in the text box, where D is the

drive letter of your CD-ROM drive.

3) Follow the InstallShield Wizard to install the driver and utility.

4) After completing the installation process, insert the WLAN PC card. When the PC card is installed, a

window showing two WIN TCP/IP options will automatically appear, see Figure 2-1.

Figure 2 -1 A typical screen with TCP/IP options

5) Use the first option if you have plans to connect to an Access Point (become associated) that is

connected to a network, where a DHCP Server is available, then a unique IP Address will be

automatically assigned to your PC card. In any other case, select the second option and assign a

unique IP Address to your PC card.

6) Finally, please go to Section 3 for Configuration.