User's Manual

Access Point SNMP Manager window.

Step 6: Assign DHCP server accessing method for AP 2 and AP3.

• At Access Point SNMP Manager window, click Setup, select Bridge, and then

IP Configuration. The following window will be displayed.

• Click DHCP Enable and select Wireless in Primary Port, then click on OK

button.

The Primary Port is the path for connecting DHCP Server to get IP address.

However, AP2 and AP3 are connected with DHCP Server via wireless

connection, so the setting must be Wireless.

• Click File and select Download Changes to download the change to AP2 and

AP3.

When all settings are complete and correct, LAN1、LAN2 and LAN3 can use the same

ESS to connect to each other by wireless and let every PC or NB in LAN2 and LAN3 to

use LAN1’ s DHCP Server.

In this mode, it is recommended that AP1, as a center AP, equip with omni-directional or

75 to 90-degree directional antennas. AP2 and AP3 can equip with directional antennas.