User's Manual

APC 4000-500 User’s Manual

Version 1.1

BSS can be jointly configured as an Extended Service Set (ESS). On account of a continuous

connection to the network, users within this ESS can roam freely. All WLAN PC Cards and APs

within one ESS must be configured with the same ESS ID.

 Before setting up an ESS for roaming, it would be helpful to achieve good performance by

choosing a feasible radio channel and right places for APs.

2. Installation

Use the procedures described in this chapter to install your CardBus WiFiCard™ adapter under MS

Windows 98SE/Me/2000, and XP.

2.1 Product Kit

Before starting installation, please make sure the CardBus WiFiCard™ adapter package you purchased

includes the following items:

 WiFiCard™

 CD-ROM (including Driver/Utility and User’s Manual).

 Quick Start Guide.

If anything is missing, please contact your vendor.

2.2 PC’s Minimum Requirements

To install the APC4000 successfully, your PC (notebook, or desktop) should meet the following

minimum requirements:

 A PCMCIA slot compliant with Release 2.1 of the PCMCIA specification.

 Windows 98SE, Me, 2000, or XP operating system.

 Minimum 10 Mbytes free disk space for installing the driver and the utility program.

2.3 Installing the Utility and Driver

Note: Please do not plug your WiFiCard™ until the following setup procedure has been completed.

Follow the steps below to install the utility and driver.

 Insert the supplied CD-ROM in the CD-ROM drive.

 The InstallShield Wizard should start automatically. If AUTORUN is disabled in your Windows