User's Manual

APC 4000-500 Users Manual
Version 1.1
15
3.3.1 General
In this page, the user can configure the station card with its network type (Infrastructure/Ad-Hoc),
SSID (up to 32 characters), channel (only in Ad hoc mode, and its range is according to the regulatory
domain), and Tx Rate (Automatic/1/2/5.5/6/9/11/12/18/24/36/48/54 Mbps), refer to Figure 3-4.
Figure 3-4 General Settings
3.3.2 Encryption
Note: When AP turns on the WEP function, APC4000 must have same WEP settings as those set in
AP.
Figure 3-5 allows the encryption settings.
Encryption Mode
Base on AP encryption settings, you can set the encryption mode to be None or WEP.
Authentication