User's Manual

APC 4000-500 User’s Manual
Version 1.1
27
3.8 Windows XP WPA Support
APC4000 also enhances security through the WPA (Wi-Fi Protected Access) supporting TKIP
(Temporary Key Integrity Protocol) or AES (Advanced Encryption Standard) algorithms to meet the
higher requirements.
From your Windows XP computer, open the Wireless Zero Client Configuration (refer to Microsoft
web site www.microsoft.com for more detail about the Wireless Zero Client Configuration):
 Open Network Connections
 Right-click the connection for which you want to set up automatic wireless network configuration,
and then click Properties.
 On the Wireless Networks tab select the Use Windows to configure my wireless network
settings check box. This check box is selected by default.
 From the Preferred networks list, right-click the connection for which you want to enable or
disable WPA authentication, and then click Properties and make all the settings as those settings
in the AP that also supports WPA.