User's Manual

Wireless LAN 11g Access Point User’s Manual

Version 0.11

3.9 Upgrade Firmware

To perform the firmware upgrade, please refer to the Figure 3.2

Click the Firmware Upgrade button to load new firmware onto the The AP. If the AP is not

experiencing difficulties, then there is no need to download a more recent firmware version, unless that

version has a new feature that you want to use.

Warning: When you upgrade the AP’s firmware, you may lose its configuration settings, so make sure

you write down the AP’s settings before you upgrade its firmware.

To upgrade the AP’s firmware:

1. Download the firmware upgrade file

2. Extract the firmware upgrade file.

3. Click the Firmware Upgrade button.

4. On the Firmware Upgrade screen, click the Browse button to find the firmware upgrade file.

5. Double-click the firmware upgrade file.

6. Click the Upgrade button, and follow the on-screen instructions.

Note: Do not power off the AP or press the Reset button while the firmware is being upgraded.