User's Manual

Wireless LAN 11g Access Point User’s Manual
Version 0.11
37
4. Troubleshooting
a). My Wireless AP will not turn on.
No LED’s light up.
Cause:
 The power is not connected.
Resolution:
 Connect the power adapter to your AP and plug it into the power outlet or check the PSE.
Note: Only use the power adapter provided with your AP. Using any other adapter may damage
your AP.
b). LAN Connection Problems:
I can’t access my AP.
Cause:
 The unit is not powered on.
 There is not a network connection.
 The computer you are using does not have a compatible IP Address.
Resolution:
 Make sure your AP is powered on.
 Make sure that your computer has a compatible IP Address. Be sure that the IP Address used
on your computer is set to the same subnet as the AP. For example, if the AP is set to
192.168.1.250, change the IP address of your computer to 192.168.1.15 or another unique IP
address that corresponds to the 192.168.1.X subnet.
Use the Reset button located on the rear of the AP to revert to the default settings.
I can’t connect to other computers on my LAN.
Cause:
 The IP Addresses of the computers are not set correctly.
 Network cables are not connected properly.
 Windows network settings are not set correctly.
Resolution: