User's Manual

27 PB-007726 Rev - A
2005.07.04
4.4.2 View
4.4.2.1 Show Values
This menu item allows the operator to view all of the configuration data at once.
The settings of each configuration item are displayed on the screen for reviewing
and referencing during the course of the configuration process.
4.4.2.2 Hide Values
This menu item hides the configuration data and only displays the individual
configuration headings. This allows for speedy access to specific items during the
configuration process.
Note: A check mark will indicate the item selected.
4.4.3 Unit
4.4.3.1 Check Connection to Unit
Use this menu command to verify the communication link between the PDA-4000
Handheld Programmer and the PT-210M Processor/Transmitter.
4.4.3.2 Program Parameters
This menu command initiates the programming process. When there have been
changes made to the configuration screen, use this command to download the
system time and the new configuration settings from the PDA-4000 into the PT-
210M.
Note:
No configuration changes take effect until the Program Parameters
operation has been completed