User's Manual

32 PB-007726 Rev - A
2005.07.04
• Seismic-Ped: If this control is unchecked, Seismic/Pedestrian detections
will be ignored. If checked, detections will be processed based on the PT-
210M operating mode:
Qualify Mode off: The PEDESTRIAN event code will be transmitted.
Qualify Mode on: The QUAL/PEDESTRIAN event code will be
transmitted.
Checking this selection also enables a drop down list menu containing the
Animal Filter and Footstep Counter. Tap the down arrow to view the
list and use the stylus to make the desired selection.
o Use Animal Filter: Seismic/Pedestrian activity will be processed
through an Animal Filter program. The program distinguishes
human activity from animal activity based on time between
footsteps. If the Animal Filter determines that an animal has
caused the activity, the detection will be ignored.
Note: When the animal filter is turned on, a group of pedestrians
may produce a signature similar to that of four legged animals,
causing the activity to be ignored. In areas where group pedestrian
traffic is anticipated, the animal filter should be turned off.
o Count “#” step(s): Seismic/Pedestrian activity will be processed
using a simple counter. When using this method, a 5-second timer
is started when the first footstep is detected. If a sufficient number
of steps are detected before the timer expires, a PEDESTRIAN
event is transmitted. If the number of steps is insufficient and the
timer expires, the mechanism resets. The number of footsteps
required for a detection is dependant upon the number of steps
selected in this field.
Note: Counting steps disables the Animal Filter
•
Left: If unchecked, Left sensor (Passive Infrared or Magnetic) detections
will be ignored. When checked, detections will be processed based on the
PT-210M operating mode.
Qualify Mode off: The LEFT event code will be transmitted.
Qualify Mode on: A qualified detection will transmit the QUAL event
code. If a SEISMIC detection is involved, QUAL/VEHICLE or
QUAL/PEDESTRIAN event codes will be transmitted.