User's Manual

39 PB-007726 Rev - A
2005.07.04
4.5.6 Schedule
The schedule section contains configuration items relating to the schedule of operation of
the PT-210M . Tap the Schedule message text or double-tap the Schedule contents field
to access the adjustment screen.
4.5.6.1 Send status at the following times
The PT-210M provides the ability to send up to 2 status transmissions per day.
Status transmissions are sent to indicate to the recipient that the PT-210M is
operational and that the transmission is properly generated and received.
• Checking the box next to the number 1 in this field activates Status 1
transmission. If enabled, a status 1 transmission will occur each day at the
time specified by the time field next to the check box. Enter the desired
time using the up and down arrows located in the field box.
• Checking the box next to the number 2 in this field activates Status 2
transmission. If enabled, a status 2 transmission will occur each day at the
time specified by the time field next to the check box. Enter the desired
time using the up and down arrows located in the field box.
Note:
Status 1 and status 2 are independent of each other. Status 2 does
not require status 1 to be enabled for operation. Status 1 Time cannot be
the same as the On Time, Off Time, or Status 2 Time. Status 2 time
cannot be the same as the On Time, Off Time, or Status 1 Time.
4.5.6.2 Detect continuously
If this control is checked, the PT-210M will be “On” (processing sensor
detections) at all times.
4.5.6.3 Detect only during specified times
If this control is checked, the PT-210M will be “On” (processing sensor
detections) only from the “On” time to the “Off” time on the days specified.
When this control is selected, the On and Off time field boxes become editable as
well as the check boxes next to the individual days of the week.