Systems Zephyr Livewire-Mpeg Gateway User's Manual

20 | Section 3
; Steamcast Configuration File
; ================================
; is is the default Steamcast server configuration file, feel free to use
; it as a template for your server’s configuration. All lines beginning with ;
; or blank are ignored by the server’s configuration parser.
; Server Configuration
; ====================
; PortBase [*8000]: e port that Steamcast will listen for connections on, generally it is
; acceptable to just leave this at the default, change it if you use port
; 8000 and/or 8001 for some other server. Ports < 1024 are reserved, so try to
; stay above that.
PortBase=9800
; MaxUser: e maximum amount of streaming clients Steamcast should
; handle, this is a global setting for all multimedia connections. Set this
; to a smart number. Setting this too high could cause your network connection
; to be flooded and cause real problems for all end users. In 0.9.7 this configuration
; option became optional. Set this to set hard limits on max listener counts, otherwise
; cumulative SourceUserMax will be used to determine the overall UserMax.
MaxUser=20
; MaxBandwidth: is is the maximum amount of out-going bandwidth allowed by Steamcast
; in units of kilo-bits per second. is is a soft limit so it is possible for the server to exceed this
; limit due to the average bandwidth system some enforcement latency may occur as well. A
; setting of zero disables this feature.
; MaxBandwidth=0
; IPMaxUser [*0]: e maximum amount of streaming clients Steamcast should
; handle per IP, this is a global setting for all multimedia connections.
; A setting of 0 disables this feature.
; IPMaxUser=0
; LogFile [None|*steamcast.log]: e location you would like Steamcast to store
; it’s log file, setting this to ‘None’ or blank disables this feature. You can use use variable
; templates to control the name of the log in real time. View the Readme for a full list of
; variables available. Ex: %m-%d-%Y-steamcast.log to have steamcast create a different log
; every day.
LogFile=steamcast.log
; MimeFile [None|*mime.types]: e location of your mime types file. e mime types file is
; critical in the implementation and usage of the on-demand capabilities of the server. is file