Systems Digital Audio Tranceiver/Mixer User's Manual

MENUS 6-19

When you select either choice, you’ll see a confirmation screen. Se-

lect Yes to reset ZephyrExpress.

— About... When you select this item, you’ll see a screen like this:

V1.2.1/2.36 is the version number. 16.07.1998 12:39 reflects when

the software was compiled.

If your ZephyrExpress’ About screen shows a lower version number,

you have old software. If yours shows a significantly higher version

number, this manual is probably out-of-date. In either case, contact

Telos customer support.

Safe mode menu

The first item in this menu is the Safe Mode Setup. See page 6-6.

The other items in this menu can be set to Block or Allow, to determine whether a user

can change the settings for that item when SAFE MODE is turned on from the back panel.

See section 3, Hardware, and the front of this section for details.

— Codec Locks the Codec menu

— Audio Locks the Audio menu

— ISDN Locks the ISDN menu

— System Locks the System menu

— Channel assign Locks the front-panel MIC, LINE, and MONITOR routing buttons

— Manual dial Prevents the user from manually entering a phone number to dial.

— Autodial Prevents the user from dialing a preprogrammed number. This is

most useful when using a contact closure or logic level to initiate a call

through the Panic Dial feature.

— Safe Setups See Setups, page 6-6

HOT TIP!

Locked menus are still viewable from the menu system, even when SAFE MODE is

on. They just can’t be changed. This is so a remote user can report the settings of

a unit without changing the lock mode.