User's Manual

--2）Press OK or MENU butto
n> System Setting> Phone Setting> Volume
Setting
--3
）Volume Setting: Handset\Speaker\Headset\Ring volume
--4) Press Enter to adjust the volume and press Save to make it work
NOTES: For the Custom Ring Type you need to upload it from website.
3.7.5 Searching Phone Book
Accurate Search
--1）Press MENU or OK button >
“Function Setting”, you can select "
Accurate Search "
--2) Then press
Enable/Disable and Save.
--
3) When you back to idle, you can use the digital keypad to search the
contact.
T9 Search --1) Press MENU or OK button >
“Function Setting”, you can select " T9
search"
--2) Then press Enable/Disable and Save.
--
3) When you back to idle, you can use the digital keypad to search the
contact.
NOTES: The Search Phone Book setting default is Accurate Search.
3.7.6 Cannot Set the Features with Keypad
As below features are cannot setting with the keypad:
1) Dial Plan.
2) Custom Ring Type
3) SNTP Server and Time & Date
4) Update the Firmware or Backup.
4. WEB User Interface
In addition to the phone user interface, you can also customize your phone via web user interface.
In order to access the web user interface, you need to know the IP address of your new phone. To
obtain the IP address, press the C key on the phone. Enter the IP address (e.g.
HTTP://192.168.0.10 or 192.168.0.10) in the address bar of web browser on your PC. The default
user name is root (case-sensitive) and the password is root (case-sensitive).