User's Manual

LTE Outdoor CPE12000 | User Manual 106
Monitoring | Iperf
Monitor >Iperf
Iperf is a tool to measure network environment such as throughput, packet loss and delay
jitter. Typically, to use Iperf, there should be a client and a server. The server opens a port
and waits for clients to build the connection. Iperf in CPE only plays as a client.
Settings
 Status: Enable/Disable Iperf.
 Last Measurement Date/Time: As titled.
 Server Address: As titled.
 Server Port: As titled.
 Management Port: To do bi-directional transmission, CPE opens “management
port” to let the server transmit data to itself.
 Management Time: The time to do Iperf recording.
 Protocol Type: TCP or UDP.