User's Manual

LTE Outdoor CPE12000 | User Manual 16
7. Installation
Selecting a Location: LTE Outdoor CPE should be pole-mounted outdoors and aligned so its
antenna faces the nearest LTE eNodeB. When selecting a suitable location for the unit, consider
these guidelines:
• Place LTE Outdoor CPE as high as possible to achieve the best possible link quality.
• Place the LTE Outdoor CPE away from power and telephone lines.
• Avoid placing LTE Outdoor CPE too close to any metallic reflective surfaces.
• Be sure to ground LTE Outdoor CPE with an appropriate grounding wire (not included) by
attaching it to the grounding screw on the unit and to a good ground connection.
Mounting the ODU: Mount LTE Outdoor CPE on a 1”-4” pole using the supplied kit, or the
optional tilt accessory.
• Using the clamp
1. Thread the M10*100mm bolt through a spring washer, flat washer and the bracket holes.
2. With the connector facing downward, attaché LTE Outdoor CPE to a 1”-4” pole.
3. Attach the bracket to the other side of the pole.
4. Thread the M10*100mm bolts through both holes on either side, and tighten the nuts.