User's Manual

LTE Outdoor CPE12000 | User Manual 57
Network | WAN Setting (Router Mode)
WAN Connection Type: users have NAT, Tunnel, Bridge and Router mode to choose
from.The following pages will show how to configure “Router mode”.
Network >WAN Setting
Connection Mode: “Automatically” or “Static”.
 If “Automatically” mode is selected, CPE would automatically acquire configuration
information.
 If “Static” mode is selected, users have to manually enter the required information in
below fields.
Host Name: Currently no function.
WAN IP Address/ Subnet Mask/ Gateway Address: These values are un-editable when
“Connection mode” is “Automatically” and editable when “Connection mode” is “Static”.
WAN MTU: This value is “Maximum Transmission Unit”. It is the largest size of a single
packet.
DNS1/2: Domain Name Server. It is editable when users select “Static” in “Connection
Mode”. Otherwise, these values will be given by DHCP server.