User's Manual

Telrad AOL-TE721 User Manual
CPE User Manual V0.1
15
4.6.2 Iperf
On this page, you can use the page of “iperf”, test throughput function.
Figure 4-6-2-1 Iperf
 Status: Default value is “Enable”
 Server Address: Default value is “8.8.8.8”
 Server Port: Default value is “5001”, the range is 1024~65535
 Management Port: Default value is “5001”, the range is 1024~65535
 Measurement Time: Default value is “60”
 Protocol Type: TCP/UDP
 Windows size: Default value is “256”
 TCP Client Number: Default value is “1”, the range is 1~10
4.6.3 Traceroute
On this page, you can Trace IP address by manual.