User's Manual

Telrad AOL-Y729 User Manual
CPE User Manual V0.1
7
Figure 4-1-3-1 PLMN Selection
 Network Mode: there are two modes Nomadic, Mobile
 Allow Roaming:
If “allow roaming” is checked, then CPE first selects eNBs from the Home/ Equivalent
PLMN-IDs, Otherwise If not available, it tries connection to “any” PLMN-ID.
If “allow roaming” is not checked, the CPE is allowed to connect to eNBs from Home/ Equivalent
PLMN-IDs only.
 Equivalent PLMN-ID List: Home PLMN-ID can be created automatically from SIM’s
IMSI (read-only). Customer can also add PLMN-ID.
 Nomadic:
Preferred eNB List: Enable/ disable “preferred” selection checkbox
Lock ND&S to the preferred list: limit eNB selection to the “preferred” list only. Condition –
this checkbox should be possible only if “enable preferred list” is checked.
Auto-Rescan Duration: Forces CPE to perform periodic re-scan/ re-connection (Nomadic mode
only) – in order to connect to the best/ preferred eNB according to the “best eNB list”
Preferred eNB list: configure “preferred” list
4.1.4 Bearer Settings
The default APN is “internet”, if you want to configure the LTE APN, you can add
the new APN and change default APN, then you can configure the APN settings by
clicking on the “ ” button.