Quick Installation Guide

The web based utility of the CPE is a web browser based configuration

interface that allows easy device set up, configuration and management

through internet browser. For example: on a PC with Windows XP or higher

version:

1. Connect the hardware of the CPE correctly.

2. Set the IP address of the connected computer and ensure that the IP

address of the computer is in the same segment as that of CPE.

Note:

By default the IP address of the CPE is 192.168.254.251, the subnet mask is

255.255.255.0 and the user log in is admin and password is admin.

It is recommended that the IP address and DNS settings are obtained

automatically.

3. Run internet explorer. Enter http://192.168.254.251 . In the address

bar and press enter.

4. Enter the correct user name and password in login window and login.

After the password verification, the web based utility functions can

be performed.

5. The HOME screen of the CPE will be displayed.