Quick Installation Guide

8
FAQ:
The power indicator is not ON.
 Check if the POE Power Supply is plugged properly into AC socket.
 Check if the LED on the POE power supply is Green indicating it is
correctly plugged in AC.
 Check if the power adapter meets the requirement and specification.
 Check if the Ethernet Cable used to carry power to CPE is a four pair
cable.
Web Based Utility cannot be accessed
 Ensure that the CPE is powered on.
 Ensure that network cable between LAN port on POE power supply
(or wireless router) and computer is properly connected.
 Ensure that IP address of the computer is correct.
Device cannot access the network
 Check if the SIM card is inserted properly.
 Check LTE network status from Web GUI and Minimum RSRP should
be greater than -120 dBm for access to the network. Typically
should be around -90 dBm.