System Manual

Page 14
 Installing Outdoor Unit (ODU) – Wall Mount
Note: The wall screws and screw anchors are not part of the package. Recommended screw
size minimum 50mm length and 6-8mm diameter.
 Header Connection
 Grounding
Make sure that the installation of the outdoor unit, antenna and cables is performed in
accordance with all relevant national and local building and safety codes. Even where
grounding is not mandatory according to applicable regulation and national codes, it is
highly recommended to ensure that the outdoor unit and the antenna mast are grounded and
suitable lightning protection devices are used so as to provide protection against voltage
surges and static charges. In any event, Telrad is not liable for any injury, damage or
regulation violations associated with or caused by installation, grounding or lightning
protection.