System Manual
Table Of Contents
Page 17
3.
Getting Started – CPE8101
4)
Packing list
Upon receiving the product, please unpack the product package carefully. Each product is
shipped with the following items:
Table 2-1 Packing List
Outdoor CPE Products
Quantity
ODU unit
1
PoE adapter
1
Power cord
1
Clamp
2
PC Ethernet Cable
1
Quick User Guide
1
If you find any of the items is missing, please contact our local distributor immediately.
5)
Unpacking the Equipment
Table 2-1 lists all the standard parts that are supplied in your LTE CPE Unit Installation
Package. Please take the time to unpack the package and check its contents against this list.
6)
Installing the Equipment
Device Logic connection
For outdoor CPE product, it is suggested that the CPE device be installed in a shaded area to
avoid direct sun light exposure which may cause over heat in certain extreme weather
condition. The CPE should be properly grounded for proper protection against lighting or
power surge.
To power on the device, the outdoor CPE must use a 24V PoE integrated DC power supply
adapter. The power adapters can operate in 100-240V AC range and therefore can be used
in different country. Once the device is powered up, the user should wait for about 2 minutes
before the device becomes operational. When the SYS LED becomes solid green, it indicates