System Manual

2.3 Installing the Equipment
2.3.1 Device connection
For outdoor CPE product, it is suggested that the CPE device be installed in a shaded area to avoid
direct sun light exposure which may cause over heat in certain extreme weather condition. The CPE
should be properly grounded for proper protection against lighting or power surge.
To power on the device, the outdoor CPE must use a 48V PoE integrated DC power supply adapter.
The power adapters can operate in 100-240V AC range and therefore can be used in different
country. Once the device is powered up, the user should wait for about 2 minutes before the device
becomes operational. For CPE with the RUN LED indicator, a slowly flashing light indicates the
system has completed the startup procedure.
To connect PC, LAN switch or other type of IP device to the CPE product, the user should use
standard CAT5 Ethernet cable and connect to the appropriate LAN port. Once connect the CPE LAN
LED indicator should come on.