System Manual

3 Managing CPE Device
CPE8000 is a user-friendly LTE CPE, and very easy to configure and setup. Subscribers can just
connect the device to their computer or home switch/router and the device is ready to provide
Internet Services.
3.1 WEB Login
It is a preferred to setup the CPE using a Web browser from a local PC connected to device LAN port.
The user should ensure that the connected PC have acquired IP address via DHCP from the device.
After IP connectivity is established between the PC and CPE device, the user may launch a Web
browser and specify http://192.168.254.251 in the address bar. A window will pop up requesting
password. Input the user login password and then click the “Log in” button. After successful log on,
the default home page of the WEB GUI interface will appear. Note that the default user passwords:
Operator user password: "Telrad4G"
End user password : "Admin"