System Manual
Table Of Contents
- About this Guide
- Introduction
- Web Interface
- Reference Manual
- LTE
- Network
- Network | WAN Setting (Tunnel Mode – Layer 2 GRE Only)
- Network | WAN Setting (Bridge Mode) - NOT SUPPORTED BY TELRAD
- Network | WAN Setting (Router Mode)
- Network | LAN Setting
- Network | QoS (Available in NAT, Tunnel, Router Mode)
- Network | Routing (Available in Tunnel, Router Mode)
- Network | Port Management | Port Forwarding (Available in NAT, Tunnel Mode)
- Network | Port Management | Port Trigger (Available in NAT, Tunnel Mode)
- Network | DSCP
- Network | MGMT Service | Web Service
- Firewall
- Management
- Monitoring
- About
LTE Outdoor CPE | User Manual P. 103
● RM Type-TR-069 (Technical Report 069)
Management > RM Settings(TR-069)
TR-069 is a technical specification entitled CPE WAN Management Protocol (CWMP). It
defines an application layer protocol for remote management of end-user devices. In the
following, the word ACS stands for Auto Configuration Server.
➢ ACS URL: The URL or IP address of the ACS.
➢ ACS UserName: The username for authentication when CPE connects to ACS. (20
alphanumeric characters allowed)
➢ ACS UserPassword: The password for authentication when CPE connects to ACS. (20
alphanumeric characters allowed)
➢ Enable Periodic Inform: Enable/Disable CPE to ask ACS periodically for configuration
update.
➢ Periodical Inform Interval: The period to update the configuration if the “Enable