System Manual
Table Of Contents
- About this Guide
- Introduction
- Web Interface
- Reference Manual
- LTE
- Network
- Network | WAN Setting (Tunnel Mode – Layer 2 GRE Only)
- Network | WAN Setting (Bridge Mode) - NOT SUPPORTED BY TELRAD
- Network | WAN Setting (Router Mode)
- Network | LAN Setting
- Network | QoS (Available in NAT, Tunnel, Router Mode)
- Network | Routing (Available in Tunnel, Router Mode)
- Network | Port Management | Port Forwarding (Available in NAT, Tunnel Mode)
- Network | Port Management | Port Trigger (Available in NAT, Tunnel Mode)
- Network | DSCP
- Network | MGMT Service | Web Service
- Firewall
- Management
- Monitoring
- About
LTE Outdoor CPE | User Manual P. 114
About | Status
About > Status
This section shows CPE basic information.
● Service Provider: As titled.
●
Product Name: The name is composed of functions provided by CPE.
●
Model ID: The ID used by the manufacturer.
●
Serial ID: The ID used by the operator.
●
IMEI: International mobile equipment identity.
●
IMSI: international mobile subscriber identity.
●
Firmware Version: The version of the firmware.
●
Firmware Creation Date: As titled.
●
Bootrom Version: The version of the bootloader.
●
Bootrom Creation Date: As titled.
●
LTE Support Band: The supported LTE band.