System Manual
Table Of Contents
- About this Guide
- Introduction
- Web Interface
- Reference Manual
- LTE
- Network
- Network | WAN Setting (Tunnel Mode – Layer 2 GRE Only)
- Network | WAN Setting (Bridge Mode) - NOT SUPPORTED BY TELRAD
- Network | WAN Setting (Router Mode)
- Network | LAN Setting
- Network | QoS (Available in NAT, Tunnel, Router Mode)
- Network | Routing (Available in Tunnel, Router Mode)
- Network | Port Management | Port Forwarding (Available in NAT, Tunnel Mode)
- Network | Port Management | Port Trigger (Available in NAT, Tunnel Mode)
- Network | DSCP
- Network | MGMT Service | Web Service
- Firewall
- Management
- Monitoring
- About
LTE Outdoor CPE | User Manual P. 42
LTE | PLMN Selection
PLMN selection is a technique to keep connecting to ISP for CPE.
If CPE search PLMNs, it will be recorded in the table below.
●
“Survey” button: to scan all the PLMN around the CPE
●
Index: Number of PLMN.
●
PLMN ID: Identification of PLMN and depends on eNodeB. (e.g. 00101)
●
Operator: Name of ISP
●
Technology: e.g. LTE