System Manual
Table Of Contents
- About this Guide
- Introduction
- Web Interface
- Reference Manual
- LTE
- Network
- Network | WAN Setting (Tunnel Mode – Layer 2 GRE Only)
- Network | WAN Setting (Bridge Mode) - NOT SUPPORTED BY TELRAD
- Network | WAN Setting (Router Mode)
- Network | LAN Setting
- Network | QoS (Available in NAT, Tunnel, Router Mode)
- Network | Routing (Available in Tunnel, Router Mode)
- Network | Port Management | Port Forwarding (Available in NAT, Tunnel Mode)
- Network | Port Management | Port Trigger (Available in NAT, Tunnel Mode)
- Network | DSCP
- Network | MGMT Service | Web Service
- Firewall
- Management
- Monitoring
- About
LTE Outdoor CPE | User Manual P. 53
●
PDN connection CID for MGMT: If selecting “Separate” in “WAN MGMT and DATA
Interface”, users need to assign the PDN used as MGMT. By now, the only option is
“Default”.
●
PDN connection CID for DATA: If selecting “Separate” in “WAN MGMT and DATA
Interface”, users need to choose from 2-8 for WAN DATA connection. Please make
sure this PDN is configured beforehand in page Mobile Network > Technology > LTE >
Multiple PDN.
●
NTP1/2: Users can specify two NTP servers in “IP” or “Domain name” format.
For example 45.79.167.181 or 0.us.pool.ntp.org
Cancel button
Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.