System Manual
Table Of Contents
- About this Guide
- Introduction
- Web Interface
- Reference Manual
- LTE
- Network
- Network | WAN Setting (Tunnel Mode – Layer 2 GRE Only)
- Network | WAN Setting (Bridge Mode) - NOT SUPPORTED BY TELRAD
- Network | WAN Setting (Router Mode)
- Network | LAN Setting
- Network | QoS (Available in NAT, Tunnel, Router Mode)
- Network | Routing (Available in Tunnel, Router Mode)
- Network | Port Management | Port Forwarding (Available in NAT, Tunnel Mode)
- Network | Port Management | Port Trigger (Available in NAT, Tunnel Mode)
- Network | DSCP
- Network | MGMT Service | Web Service
- Firewall
- Management
- Monitoring
- About
LTE Outdoor CPE | User Manual P. 74
Network | MGMT Service | Web Service
Network > MGMT Service
MGMT service is about HTTP and HTTPs configuration.
● HTTP Service: When it is enabled, clients in the LAN side can link to CPE HTTP service.
Users can set the port used by HTTP service.
●
HTTPs Service: When it is enabled, clients in the LAN can link to CPE HTTPs service. Users
can set the port used by HTTPs service. Clients in the WAN side are able to link to CPE
HTTPs service when “HTTPs service” is on and “allow HTTPs login from WAN” in firewall
section is on. Please note that the clients in LAN and WAN may use different ports to link
to CPE HTTPs service.
●
Import WEB Certificate: The certificate is used by HTTPs service, users can upload the
certificate and prepare the passphrase for CPE and view the current certificate through
view button.