System Manual
Table Of Contents
- About this Guide
- Introduction
- Web Interface
- Reference Manual
- LTE
- Network
- Network | WAN Setting (Tunnel Mode – Layer 2 GRE Only)
- Network | WAN Setting (Bridge Mode) - NOT SUPPORTED BY TELRAD
- Network | WAN Setting (Router Mode)
- Network | LAN Setting
- Network | QoS (Available in NAT, Tunnel, Router Mode)
- Network | Routing (Available in Tunnel, Router Mode)
- Network | Port Management | Port Forwarding (Available in NAT, Tunnel Mode)
- Network | Port Management | Port Trigger (Available in NAT, Tunnel Mode)
- Network | DSCP
- Network | MGMT Service | Web Service
- Firewall
- Management
- Monitoring
- About
LTE Outdoor CPE | User Manual P. 97
button.
File Download Window
If user wants to restore the system to the restore the configuration, click “Browse”
button to select the previously saved configuration file, and then click “Restore” button
to restore the system to the previous settings.
Management > Software > Upgrading Window
A window will be popped up to let users to key in the passphrase when
users save/restore the configuration. Please note that the entered
passphrases need to be consistent when users do save/restore
process.
Enter Passphrase Window