User's Manual

�
Installing and Removing the SIM Card
 When the SIM card is improperly installed or the SIM card is damaged, the
“Insert Card” message appears on the screen. If the card is improperly installed,
remove the SIM card and insert it again. If the SIM card is damaged, contact your
card provider.
 When there is no installed SIM card, an “Insert Card” message appears.
Turn the phone off and insert the card
 When a SIM card is installed, the “Enter PIN Code” message appears on the
screen. Enter the number supplied by the card provider that is longer than 4
digits, and press (OK).
 If you enter an incorrect PIN 3 times in succession, the SIM card is locked.
The “PIN Is Blocked” message appears and the "Enter PUK" message appears
requiring the PUK code.
 In this case, enter the PUK code supplied when you purchased the card.
If you enter an incorrect PUK code 10 times in succession, the card is locked.

USING THE SIM CARD


1. Remove the Battery 2. Insert the SIM Card
4. Install the Battery 3. Insert the SIM Card
TDC-320 GSM-EN 2004.7.1 1:33 PM 페이지22 (1,1)